Hi,
I've been around reading loads of posts here but still failed to get a definitive answer to my question.
I'm going to buy a bike within 2-3 months but the problem is dire. I love D200 but that's a naked bike and the cost is almost similar to R15 but the performance is miles ahead. Also pillion comfort has made me put down both these bikes and choose b/w CBR150 and 200NS(correct me if I'm wrong in my assumption).
Now am I missing something here because CBR 250 would go well over 1.60 plus I'd cry for ABS and that would not really be feasible from a budgetary point of view.
Now, about me:
5'8 -ish lean 22 and probably on a job by then. I like to rush through traffic like a thief(so no Royal Enfield stuff) and kill the throttle of anything I drive(with care ofcourse).
Seeing all this P200 NS seems apt but then no fairing and for highways, would maintaining high speeds be a tedious affair ?
CBR looks hot and is a faired one but comes at a price quite high for a 150cc mill.
Suggestions, contradictions and advise, all are heartly welcome. I have sufficient time to think so give me a satisfactory response or I'll have loads of cross questions :p
I've been around reading loads of posts here but still failed to get a definitive answer to my question.
I'm going to buy a bike within 2-3 months but the problem is dire. I love D200 but that's a naked bike and the cost is almost similar to R15 but the performance is miles ahead. Also pillion comfort has made me put down both these bikes and choose b/w CBR150 and 200NS(correct me if I'm wrong in my assumption).
Now am I missing something here because CBR 250 would go well over 1.60 plus I'd cry for ABS and that would not really be feasible from a budgetary point of view.
Now, about me:
5'8 -ish lean 22 and probably on a job by then. I like to rush through traffic like a thief(so no Royal Enfield stuff) and kill the throttle of anything I drive(with care ofcourse).
Seeing all this P200 NS seems apt but then no fairing and for highways, would maintaining high speeds be a tedious affair ?
CBR looks hot and is a faired one but comes at a price quite high for a 150cc mill.
Suggestions, contradictions and advise, all are heartly welcome. I have sufficient time to think so give me a satisfactory response or I'll have loads of cross questions :p