Hello xBhpians,
I have been searching thru each every forum on web to create a paddock stand for Hero Impulse, everywhere I could only see either the ready made stands' images or some rough cut video of how someone is parking their bike on it. I have got a stand fabricated myself, so thought of sharing the details with you guys. I have mentioned the measurements in the 1st picture of stand for better idea.
P.S. I have got stand angled at 15 degrees (30" long and 14" tall, angled at 15 degrees) so it rocks the bike backwards when parked.
Total expense:
1.25 inch (15MM gauge) pipe x 10 Feet - 130/- (Purchased it on weight from scrap dealer)
2 wheels with nuts & bolts = 40/-
Cutting & Welding job = 450/-
Door handle = 15/-
Black oil paint can = 20/-
Please have a look at following images, hope it helps..... & yes your suggestions/comments are welcome.
![Name: Paddock.jpg
Views: 990
Size: 93.1 KB]()
![Name: DSC_2844.jpg
Views: 984
Size: 96.7 KB]()
![Name: DSC_2846.jpg
Views: 709
Size: 97.5 KB]()
![Name: DSC_2847.jpg
Views: 718
Size: 97.2 KB]()
![Name: DSC_2848.jpg
Views: 746
Size: 94.9 KB]()
![Name: DSC_2851.jpg
Views: 873
Size: 93.9 KB]()
I have been searching thru each every forum on web to create a paddock stand for Hero Impulse, everywhere I could only see either the ready made stands' images or some rough cut video of how someone is parking their bike on it. I have got a stand fabricated myself, so thought of sharing the details with you guys. I have mentioned the measurements in the 1st picture of stand for better idea.
P.S. I have got stand angled at 15 degrees (30" long and 14" tall, angled at 15 degrees) so it rocks the bike backwards when parked.
Total expense:
1.25 inch (15MM gauge) pipe x 10 Feet - 130/- (Purchased it on weight from scrap dealer)
2 wheels with nuts & bolts = 40/-
Cutting & Welding job = 450/-
Door handle = 15/-
Black oil paint can = 20/-
Please have a look at following images, hope it helps..... & yes your suggestions/comments are welcome.
